Delta Lite Plus is composed of a fiberglass fabric impregnated with a proprietary resin system (polyester-based resin), plus white pigmentation. The material is radiolucent and designed for clinical casting and splinting. For full material safety data, refer to BSN Medical product literature and SDS.

Intended for use by trained clinicians. Typical application steps:

1. Prepare the limb with a stockinette and appropriate padding to protect skin and bony prominences.
2. Immerse the required length of tape in room-temperature water to activate the resin; squeeze out excess water.
3. Apply the tape with even tension, overlapping by approximately 50% for strength and contouring around anatomy as required.
4. Manipulate into final shape during initial cure time; allow to set fully (curing time depends on ambient temperature and layer thickness).
5. Trim edges and finish per clinical protocol. Removal should be performed with appropriate tools (e.g., cast saw) and training.

Always follow BSN Medical instructions and local clinical protocols.

Delta Lite Plus is suited for orthopaedic surgeons, emergency and urgent care clinicians, sports medicine specialists, physiotherapists, and allied health professionals who require a lightweight, radiolucent casting tape for fracture immobilisation, splinting and temporary casts.

Caution: For professional use only. Avoid direct prolonged contact with open wounds. Skin sensitivity to resin components is possible; discontinue use if adverse reactions occur. During cure, the exothermic reaction may produce heat — monitor patient comfort, especially with thick layers.

Storage: Store in original packaging in a cool, dry place away from direct sunlight. Recommended storage conditions generally 10–30°C. Do not expose to high heat or humidity. Consult product label and BSN Medical SDS for complete storage and safety information.